VF
| Title | Published in | Access level | OA Policy | Year | Views | Downloads | |
|---|---|---|---|---|---|---|---|
| Influence of sterilization on the retention forces of lithium disilicate and polymer-infiltrated ceramic-network crowns bonded to titanium base abutments : An in-vitro study | Clinical oral implants research |  | 2024 | 58 | 3 | ||
| Mechanical stability of posterior implant-supported monolithic zirconia cantilever on titanium-base abutments. An in vitro study | Clinical oral implants research |  | 2024 | 39 | 103 | ||
| In vitro assessment of cementation of CAD/CAM fabricated prostheses over titanium bases. A systematic review | Clinical oral implants research | | 2024 | 27 | 3 | ||
| The influence of titanium‐base abutment geometry and height on mechanical stability of implant‐supported single crowns | Clinical oral implants research | | 2023 | 72 | 2 | ||
| Group 2 ITI Consensus Report : Technological developments in implant prosthetics | Clinical oral implants research | | 2023 | 23 | 10 | ||
| Effect of splinting scan bodies on the trueness of complete-arch digital implant scans with 5 different intraoral scanners | The journal of prosthetic dentistry | | 2023 | 61 | 132 | ||
| A technique for separating a ceramic implant-supported restoration from a titanium base abutment | The Journal of prosthetic dentistry | | 2022 | 129 | 223 | ||
| A multicenter randomized controlled clinical pilot study of buccally micro-veneered lithium-disilicate and zirconia crowns supported by titanium base abutments: 1-year outcomes | Clinical oral implants research | | 2022 | 132 | 20 | ||
| Accuracy of additively manufactured and milled interim 3-unit fixed dental prostheses | Journal of prosthodontics | | 2022 | 134 | 45 | ||
| Influence of the titanium base abutment design on monolithic zirconia multiple-unit implant fixed dental prostheses: a laboratory study | The International journal of oral and maxillofacial implants | | 2022 | 299 | 5 | ||
| Retention and marginal integrity of CAD/CAM fabricated crowns adhesively cemented to titanium base abutments - influence of bonding system and restorative material | The international journal of prosthodontics | | 2022 | 60 | 0 | ||
| The influence of finishing lines and margin location on enamel and dentin removal for indirect partial restorations: A micro-CT quantitative evaluation | Journal of dentistry | | 2022 | 143 | 0 | ||
| Mechanical stability and technical outcomes of monolithic CAD/CAM fabricated abutment-crowns supported by titanium bases: An in vitro study | Clinical Oral Implants Research | | 2021 | 150 | 3 | ||
| Mechanical stability of restorations supported by titanium base, zirconia, and polyetherketoneketone abutments on one- and two-piece zirconia implants | International Journal of Oral & Maxillofacial Implants | | 2021 | 187 | 2 | ||
| Retention forces of monolithic CAD/CAM crowns adhesively cemented to titanium base abutments-effect of saliva contamination followed by cleaning of the titanium bond surface | Materials | | 2021 | 186 | 94 | ||
| Fabrication, workflow and delivery of reconstruction: Summary and consensus statements of group 4. The 6th EAO Consensus Conference 2021 | Clinical oral implants research | | 2021 | 176 | 51 | ||
| The influence of patient-related factors and material selection on the clinical outcomes of fixed and removable complete implant prostheses: an overview on systematic reviews | The International Journal of Prosthodontics | | 2021 | 169 | 0 | ||
| Effect of airborne-particle abrasion of a titanium base abutment on the stability of the bonded interface and retention forces of crowns after artificial aging | The Journal of Prosthetic Dentistry | | 2021 | 401 | 8 | ||
| In vitro and in vivo accuracy of full-arch digital implant impressions | Clinical oral implants research | | 2021 | 152 | 90 | ||
| Recommendations for implant-supported full-arch rehabilitations in edentulous patients: the oral reconstruction foundation consensus report | The International Journal of Prosthodontics | | 2021 | 198 | 1 | ||
| Technical complication of a zirconia multiple-unit FDP supported by titanium base abutments - case report on a bonding failure and treatment alternative | The International Journal of Prosthodontics | | 2021 | 195 | 199 | ||
| Temporary implant-supported single crowns using titanium base abutments: an in vitro study on bonding stability and pull-out forces | The International Journal of Prosthodontics | | 2020 | 235 | 0 | ||
| The 3D-printed prototype: a new protocol for the evaluation and potential adaptation of monolithic all-ceramic restorations before finalization | Quintessence International | | 2020 | 220 | 2 | ||
| Latest advances in augmented reality technology and its integration into the digital workflow | International Journal of Computerized Dentistry | | 2020 | 196 | 2 | ||
| Three-dimensional evaluation of peri-implant soft tissue when tapered implants are placed: pilot study with implants placed immediately or early following tooth extraction | International Journal of Oral & Maxillofacial Implants | | 2020 | 165 | 1 | ||
| Influence of different cements on the color outcomes of titanium-based lithium disilicate all-ceramic crowns and peri-implant soft tissue | The International Journal of Prosthodontics | | 2020 | 216 | 1 | ||
| Accuracy of vertical dimension augmentation using different digital methods compared to a clinical situation-a pilot study | The International Journal of Prosthodontics | | 2020 | 268 | 0 | ||
| Randomized controlled clinical trial of digital and conventional workflows for the fabrication of zirconia-ceramic posterior fixed partial dentures. Part II: Time efficiency of CAD-CAM versus conventional laboratory procedures | The Journal of Prosthetic Dentistry | | 2019 | 399 | 0 | ||
| Mechanical stability of zirconia meso-abutments bonded to titanium bases restored with different monolithic all-ceramic crowns | International Journal of Oral & Maxillofacial Implants | | 2019 | 273 | 1 | ||
| Virtual diagnostics and guided tooth preparation for the minimally invasive rehabilitation of a patient with extensive tooth wear: a validation of a digital workflow | The Journal of Prosthetic Dentistry | | 2019 | 358 | 5 | ||
| Randomized controlled clinical trial of digital and conventional workflows for the fabrication of zirconia-ceramic fixed partial dentures. Part I: Time efficiency of complete-arch digital scans versus conventional impressions | The Journal of Prosthetic Dentistry | | 2019 | 307 | 1 | ||
| Préparations verticales antérieures : définition des limites et du profil d'émergence par duplication de la couronne provisoire | QDRP | | 2019 | 1,215 | 521 | ||
| Reliability of a three-dimensional facial camera for dental and medical applications: a pilot study | The Journal of Prosthetic Dentistry | | 2019 | 325 | 0 | ||
| Monolithic zirconia multiple-unit implant reconstructions on titanium bonding bases : an alternative abutment choice | International Journal of Computerized Dentistry | | 2018 | 301 | 3 | ||
| Excellence in dental esthetics | International Journal of Esthetic Dentistry | | 2018 | 270 | 1 | ||
| Comparison of user satisfaction and image quality of fixed and mobile camera systems for 3-dimensional image capture of edentulous patients: a pilot clinical study | The Journal of Prosthetic Dentistry | | 2018 | 298 | 1 | ||
| Clinical quality and efficiency of monolithic glass ceramic crowns in the posterior area: digital compared with conventional workflows | International Journal of Computerized Dentistry | | 2018 | 254 | 0 | ||
| Fracture strength of zirconia implant abutments on narrow diameter implants with internal and external implant abutment connections: a study on the titanium resin base concept | Clinical Oral Implants Research | | 2018 | 330 | 0 | ||
| Possibilities and limitations of computer-assisted implant planning and guided surgery in the anterior region | International Journal of Computerized Dentistry | | 2018 | 258 | 1 | ||
| Color differences between pink veneering ceramics and the human gingiva | International Journal of Periodontics and Restorative Dentistry | | 2018 | 303 | 0 | ||
| Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part II: CAD-CAM versus conventional laboratory procedures | Journal of Prosthetic Dentistry | | 2017 | 474 | 1 | ||
| Randomized controlled clinical pilot study of all-ceramic single-tooth implant reconstructions: clinical and microbiological outcomes at one year of loading | Clinical oral implants research | | 2017 | 472 | 210 | ||
| Discoloration of the mucosa caused by different restorative materials - a spectrophotometric in vitro study | Clinical Oral Implants Research | | 2017 | 447 | 0 | ||
| Extending the service life of existing dental restorations with esthetic and functional limitations | Journal of Prosthetic Dentistry | | 2017 | 455 | 0 | ||
| Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part I: digital versus conventional unilateral impressions | The Journal of prosthetic dentistry | | 2016 | 494 | 674 | ||
| The Esthetic Effect of Veneered Zirconia Abutments for Single-Tooth Implant Reconstructions: A Randomized Controlled Clinical Trial | Clinical implant dentistry and related research | | 2016 | 506 | 223 | ||
| Threshold Values for the Perception of Color Changes in Human Teeth | International Journal of Periodontics & Restorative Dentistry | | 2016 | 430 | 0 | ||
| Randomized Controlled Clinical Trial of All-Ceramic Single Tooth Implant Reconstructions Using Modified Zirconia Abutments: Radiographic and Prosthetic Results at 1 Year of Loading | Clinical implant dentistry and related research | | 2016 | 475 | 1,474 | ||
| Threshold value for the perception of color changes of human gingiva | The International journal of periodontics & restorative dentistry | 2014 | 565 | 0 | |||
| All-ceramic single-tooth implant reconstructions using modified zirconia abutments: a prospective randomized controlled clinical trial of the effect of pink veneering ceramic on the esthetic outcomes | The International journal of periodontics & restorative dentistry | | 2014 | 648 | 327 | ||
| Minimally invasive rehabilitation of a patient with amelogenesis imperfecta | The international journal of esthetic dentistry | | 2014 | 683 | 1,087 | ||
| Criteria for the selection of restoration materials | Quintessence international | | 2014 | 569 | 0 |
