| CAD/CAM milled complete removable dental prostheses: An in vitro evaluation of biocompatibility, mechanical properties, and surface roughness | Dental Materials Journal |  | | 2018 | 425 | 585 |
|
| Grinding damage assessment for CAD-CAM restorative materials | Dental Materials |  | | 2017 | 912 | 6 |
|
| Modulation of osteoblast behavior on TiNxOy coatings by altering the N/O stoichiometry while maintaining a high thrombogenic potential | Journal of biomaterials applications | | | 2016 | 877 | 3 |
|
| Grinding damage assessment on four high-strength ceramics | Dental materials | | | 2016 | 964 | 1,302 |
|
| Hydrothermal degradation of a 3Y-TZP translucent dental ceramic: A comparison of numerical predictions with experimental data after 2 years of aging | Dental materials | | | 2016 | 931 | 1 |
|
| Medium-Term Function of a 3D Printed TCP/HA Structure as a New Osteoconductive Scaffold for Vertical Bone Augmentation: A Simulation by BMP-2 Activation | Materials | | | 2015 | 480 | 330 |
|
| A new testing protocol for zirconia dental implants | Dental materials | | | 2015 | 728 | 0 |
|
| The effect of a fiber reinforced cavity configuration on load bearing capacity and failure mode of endodontically treated molars restored with CAD/CAM resin composite overlay restorations | Journal of dentistry | | | 2015 | 729 | 9 |
|
| Effect of different surface treatments on the hydrothermal degradation of a 3Y-TZP ceramic for dental implants | Dental materials | | | 2014 | 702 | 439 |
|
| Sputtered titanium oxynitride coatings for endosseous applications: Physical and chemical evaluation and first bioactivity assays | Applied surface science | | | 2014 | 808 | 4 |
|
| Adhesive restoration of anterior endodontically treated teeth: influence of post length on fracture strength | Clinical oral investigations | | | 2014 | 779 | 1,651 |
|
| Post-hot isostatic pressing: A healing treatment for process related defects and laboratory grinding damage of dental zirconia ? | Dental Materials | | | 2013 | 216 | 1 |
|
| In vitro bone exposure to strontium improves bone material level properties | Acta biomaterialia | | | 2013 | 653 | 0 |
|
| TiNOx coatings on roughened titanium and CoCr alloy accelerate early osseointegration of dental implants in minipigs | Bone | | | 2013 | 869 | 4 |
|
| Titanium nitride oxide coating on rough titanium stimulates the proliferation of human primary osteoblasts | Clinical oral implants research | | | 2011 | 1,172 | 5 |
|
| Low temperature degradation of a Y-TZP dental ceramic | Acta biomaterialia | | | 2011 | 678 | 3 |
|
| Fatigue behavior in water of Y-TZP zirconia ceramics after abrasion with 30μm silica-coated alumina particles | Dental Materials | | | 2011 | 570 | 3 |
|
| Kinetics of light-cure bracket bonding: power density vs exposure duration | American journal of orthodontics and dentofacial orthopedics | | | 2008 | 626 | 0 |
|
| Push-out bond strengths of endodontic posts bonded with different resin-based luting cements | American journal of dentistry | | | 2007 | 542 | 484 |
|
| Hydrothermal and mechanical stresses degrade fiber-matrix interfacial bond strength in dental fiber-reinforced composites | Journal of biomedical materials research. Part B, Applied biomaterials | | | 2006 | 556 | 1,071 |
|
| Thermal risks from LED- and high-intensity QTH-curing units during polymerization of dental resins | Journal of biomedical materials research. Part B, Applied biomaterials | | | 2005 | 468 | 767 |
|
| Phosphaalkene radical anions : electrochemical generation, ab initio predictions, and ESR study | Journal of physical chemistry. C | | | 1992 | 626 | 0 |
|
| Formation and Structure of the Phosphoranyl Radical Derived from 1,2-Phenylene Phosphorochloridate: a Solid-State ESR Study | Helvetica Chimica Acta | | | 1987 | 187 | 0 |
|
| Theoretical and single-crystal ESR study of the structure and dissociation of a R2PCl·- radical anion | Journal of the American Chemical Society | | | 1986 | 49 | 0 |
|
