en
Scientific article
English

Measurement and Numerical Evaluation of AC Losses in a ReBCO Roebel Cable at 4.5 K

Publication date2016
Abstract

EuCARD-2 aims to research ReBCO superconducting magnets for future accelerator applications. The properties of ReBCO conductors are very different from low-temperature superconductors. To investigate dynamic field quality, stability, and normal zone propagation, an electrical network model for coated conductor cables was developed. To validate the model, two identical samples were prepared at CERN, after which measurements were taken at the University of Twente and Southampton University. The model predicts that for a Roebel cable, in a changing magnetic field applied in the perpendicular direction, hysteresis loss is much larger than coupling loss. In the case of a changing magnetic field applied parallel to the cable, coupling loss is dominant. In the first case, the experiment is in good agreement with the model. In the second case, the data can only be compared qualitatively because the calibration for the inductive measurement is not available.

Research group
Citation (ISO format)
VAN NUGTEREN, J. et al. Measurement and Numerical Evaluation of AC Losses in a ReBCO Roebel Cable at 4.5 K. In: IEEE transactions on applied superconductivity, 2016, vol. 26, n° 3. doi: 10.1109/TASC.2016.2525919
Main files (1)
Article (Published version)
accessLevelRestricted
Identifiers
ISSN of the journal1051-8223
571views
0downloads

Technical informations

Creation05/17/2016 6:36:00 PM
First validation05/17/2016 6:36:00 PM
Update time03/15/2023 12:20:45 AM
Status update03/15/2023 12:20:44 AM
Last indexation05/02/2024 5:26:28 PM
All rights reserved by Archive ouverte UNIGE and the University of GenevaunigeBlack